600TP model

Semiautomatic turntable wrapper

Semiautomatic turntable wrapping machines with automatic cutting system and gripper. Detect the height of the pallet making an optimized wrapping process. At the end of the cycle they require the presence of the operator to cut the film and remove the pallet. The pallet is introduced into the turntable, the platform will start its turn at the selected speed according to the kind of wrap selected. At the end of the cycle, the presence of an operator is required to cut the film and remove the pallet.

Standard Machine

Hinged mast

Powered film carriage with variable speed, placed sidewise

Adjustable mechanical film brake with foot trapping detector 

Automatic load height detection by photocell

Turnrable dimensions: Ø1.500 mm.

Open turntable to load the pallet directly with a forklift

Soft start/stop by SCHENEIDER frequency inverter with a return to starting position

4 wrapping programs: Single / Cross-wrap / Cross-plus / Full

Wrapping cycles counter

Independently adjustable top and bottom reinforcement wraps

PLC controlled, with display control panel

Independent ascent and descent carriage speed for film saving

Reinforcement wraps at any point of the cycle

Variable production depending on the operator and the characteristics of the load.

Extensions

1. Direct film brake

2. Machanical film brake (standard)

3. Electromagnetic brake

4. Powered pre-stretch film 300% 

5. Twin film holder

6. Powered top platen

Options

Ultrasonic detector for black loads

Stainless Steel 304

ATEX explosive environments

Special heights

Special platforms

Different pre-stretch ratios 150%, 200%, 300% or 400%

Carriages for 750 mm oor 1000 mm height film

PLC extended up to 10 programs

Other turntable wrapper options

Up to 20 pallets/hour

Up to 20 pallets/hour

Up to 10 pallets/hour

Up to 20 pallets/hour

Up to 35 pallets/hour

600TP model in operation